Best Drill Press Vise Reviews 2022- Guide From Experts

If you have a drill press in your workshop, then you know that a vise is invaluable. You can do without one but that only makes your work unnecessarily difficult. If you have never seen one, a drill press has two jaws. One jaw moves. The other one stays in place.

When you have an object you want to drill, you place it in between the jaws. Then you tighten your jaws around the workpiece. This way, you can trust that it will stay in place once you start drilling.

The best drill press vise will add stability to your operations, allowing you to drill more consistently. It is also suitable for reaming, grinding, tapping, and any other operation you might have in mind.

But finding a decent drill press is not easy. Many of them look the same. As such, separating the good ones from the bad ones tends to present a challenge. But this is why this guide was created.

We have done the difficult work of looking through the numerous drill press vises on the market to identify the best among them. If you need a vise, one that won’t disappoint, take your pick from the products below. One of them is bound to suit your needs.

Editorial Pick

Our top pick

If you want a vise that will give you great value for your money, try out Top Pick:

Irwin Tools 226340 – Despite its friendly price tag, this vise ticks all the right boxes. Not only is it lightweight but it boasts a 4.5-inch jaw capacity, textured jaws that guarantee a secure grip and a slotted base that simplifies installation and positioning.

Click Here to Read Full Review

Our budget pick

If you want to add stability to your work but you are financially constrained, you can always try our Budget Pick:

WEN 423DPV –This vise can grip any type of workpiece you have on hand, including wood, metal, and plastic. It features a cast-iron construction, 3-inch jaws that can open up to 3-1/10 inches, a 1-inch throat depth, four mounting slots, and a universal design compatible with most drill presses.

Click Here to Read Full Review

Our best pick

If you want a drill press vise that exceeds all expectations, try our Overall Best Pick:

WEN 414CV – This compound cross slide vise is made from industrialstrength powder-coated cast iron. It is as durable as they come. It has a universal design that is compatible with most drill presses.The jaws can travel 5.8 inches (left and right) and 6 inches (front and back).

Click Here to Read Full Review

Factors to Consider When Selecting a Drill Press Vise

If you want to identify and purchase a decent vise that will serve you for a long time, you must take the following factors into account:

  • Jaw

The width of the jaws matters. It will tell you the sizes of the objects it can hold. The wider the jaws, the wider the materials it can hold. The reverse is also true. Some vises have jaws that are not only wide but they have special textures and grooves that allow them to hold round objects and workpieces with irregular shapes.

  • Weight

Even though most vises do the same thing, they are not the same size. Some vises are larger and heavier than others. Lighter vises are technically easier to work with. But their heavier counterparts are more stable. They do not require as many bolts to secure because their build allows them to withstand the vibrations and the pressure exerted by the drill press.

  • Throat Depth

The throat depth is the distance between the top of the jaws and the base. The throat depth will tell you the length of the workpieces you can fit in the vise. The greater the throat depth, the longer the pieces the vise can accept.

  • Purpose

Some vises are better suited to certain jobs than others. This is why you are encouraged to first determine the purpose of the vise before you get one. Some vises are compatible with precision work. Others permit the sort of tilting that allows you to drill at unique angles. You should let your purpose determine the type of vise you buy.

  • Dimensions

Many people forget to account for the dimensions of the vise. For a vise to do its work, its dimensions should align with the dimensions of the drill press you are using. Otherwise, you are going to have a difficult time installing the vise in the first place.

  • Drill Increments

The drill increments will tell you the level of precision a vise can deliver. They determine how finely you can drill. This bleeds back into the issue of purpose. If your work requires precision, you must acquire a vise whose drill increments can deliver the precision you want.

  • Material

The material you are going to work with can affect the vise you use. Some vises work on all kinds of materials. But you also have vises whose jaws have special features that are designed to hold specific types of workpieces. For instance, some vises have heat-treated jaws that are meant for heavy-duty operations.

  • Warranty

Any tool associated with a drill press requires a good warranty. A vise is no different. A good warranty gives you peace of mind because it allows you to reduce your replacement and repair costs in case your vise fails to perform as expected.

  • Extras

Most vises are the same, to an extent. That is to say, they have similar attributes and they perform the same roles. However, some vises have special features like cross sliding and the ability to tilt at extreme angles. This sets them apart. If possible, you should always get vises with extra features because they always simplify your work.


1) Irwin Tools Drill Press Vise 226340

Irwin makes vises that can handle any job, including cutting, sanding, and drilling. This one is no different. The body was made from forged iron which explains its durability.

The textured 4-inch jaws provide a secure grip. Boasting a 4-1/2-inch jaw capacity and a clamping pressure of 1000 pounds, the product is quite light, designed to perform equally light tasks.

Irwin Tools Drill Press Vise 226340

Key Features:

  • Forged iron construction
  • Slotted base
  • 4-1/2-inch jaw capacity
  • 1000 pounds clamping pressure
  • 7 pounds in weight

The textured design of the jaws adds to the firmness of its grip. The slotted base simplifies installation and positioning. Though, it takes a while to check and tune. You cannot use it straight out of the box.

  • Easy installation and positioning
  • Textured jaws provide a secure grip
  • Durable forged iron construction
  • Only suited to small tasks
  • Requires a bit of tuning before you can use it

Expert Tips

This is a small and simple drill press vise that is primarily suited to small workpieces.

2) WEN 414CV Compound Cross Slide Vise

Some people only know this as a 3-inch drill press vise but it comes in 4, 5, 6, and 8 inches. The jaws are 4.25 inches x 1.25 inches and they can open to a width of 4.125 inches. Made from industrial strength powder-coated iron and featuring a design that is compatible with most drill presses, this vise will bring stability to your workpieces, appealing to people that want to perform precision work.

Regardless of where you choose to attach it (the drill press, worktable, benchtop, etc.), the vise will deliver over 1900 pounds of clamping force. This is the sort of grip that will keep your workpieces in place.

Best Drill Press Vise

Key Features:

  • Heavy-Duty Powder Coated Cast iron construction
  • 1900 Pounds of clamping force
  • Each Handwheel offers machined 0.1mm increments
  • Each full turn represents 3mm of travel
  • Vise moves 148mm and 150mm along the X and Y-Axis
  • 19 pounds

You will have an easier time holding round objects horizontally or vertically because of the V-shaped groove. With the removable handles, you will have an easier time installing the product in tight and inconvenient locations.

  • Durable Industrial-strength construction
  • Can hold round objects horizontally and vertically
  • Easy to install in tight spaces
  • Precise
  • Heavy for its size

Expert Tips

This drill press vise is suitable for people that want to do incremental drilling and precision work. It will also appeal to both woodworkers and metalworkers.

3) Performance Tool W3939

This vise is compatible with medium-sized drill presses. The jaws have a width of 2-1/2 inches. They are etched. This adds to their gripping power, preventing objects from slipping. Along with a pivot handle that is easy to turn and slot design mounting holes, the vise is steel-jawed and magnetic.

Performance Tool W3939

Key Features:

  • 2-1/2-inch Jaw Width
  • Slot design mounting holes
  • Etched Jaws
  • 2.8 pounds

At 2.8 pounds, it is both small and light. It doesn’t take up much space. Made from cast iron, it is as solid as a rock. It is a little difficult to open and close in the beginning but it gets easier over time.

Don’t expect optimal precision. It will hold things down but it has too much play.

  • Small and lightweight
  • Durable
  • Etching on the jaws prevents slipping
  • Lacking in precision

Expert Tips

This is a basic drill press vise. It will suit anyone who just wants an adequate vise, one without any of the bells or whistles. It won’t appeal to anyone that prioritizes precision

4). Wilton 11694 Cross Slide Drill Press Vise

Drill press vises reviews love this item because it is durable. Boasting fine grain cast iron construction, it also offers precise positioning and hardened V-Grooved Jaws that can hold and move round objects horizontally and vertically.

Capable of moving in 0.1mm increments in any direction, it uses screws coated with black oxide. This augments their life and durability. At 20 pounds, it is one of the heavier vises on this list. You can blame this on its high precision screwing system.

Wilton 11694 Cross Slide Drill Press Vise

Key Features:

  • Cast Side Knobs can dial 0.1mm increments
  • Hardened V-Grooved Jaws
  • 20 pounds

The product requires some adjusting when it first arrives. It does not come with instructions.

  • The Jaws can hold round objects
  • Durable fine grain cast iron construction
  • Smooth movement in all directions
  • Expensive
  • Requires adjustment on arrival

Expert Tips

If all you want is a basic drill press milling vise, you can’t do better than this one, not in this price range. It gets the job done. Though, it isn’t the best option for highly precise work.

5) DELTA 20-621

This vise has a durable cast-iron construction. The large-capacity jaws are designed to hold workpieces with a width of up to 4 inches. The built-in groove down the middle can hold dowels of up to ½ inches in diameter while you drill.

Compatible with both wood and metalworks, the vise weighs only 6 pounds and it does not include any mounting hardware. Some users have criticized the product for its lack of precision. The clamp is capable of moving and slipping during the worst possible moments, ruining the angles of your drilling operations.

DELTA 20-621

Key Features:

  • Cast iron construction
  • Jaws can hold pieces of up to 4 inches in width
  • Built-in groove
  • 6 pounds

It is cheap, so it cannot be expected to perform as effectively as more expensive models. You basically get what you paid for

  • Durable body
  • Suitable for both wood and metal
  • The vise can hold curved pieces
  • Low precision
  • No mounting hardware

Expert Tips

This isn’t the sort of vise you use for the long term. It will serve your needs in the short term, especially if you are willing to make do with any old vise. The product does its job. But it has poor precision.

6) Wilton 11753 3 Inch Drill Press Vise

This is a versatile vise that is suitable for a variety of applications, including reaming, drilling, and tapping. With reaming, the vise will appeal to anyone whose work requires angle setup.

Wilton 11753 3 Inch Drill Press Vise

Key Features:

  • Tilts 0 to 90 Degrees
  • Cast-iron construction
  • Scaled in 1-Degree increments

The cradle design permits tilting from 0 to 90 degrees. The vise includes a pin that allows you to set the tilt at any angle that suits you. Tightly constructed, there is no play in any of the moving parts. The angle adjustment is smooth. The body is durable cast-iron. The jaws are hardened steel. Some black oxide was used to coat the screws to extend their life.

  • Allows tilting of up to 90 degrees
  • Durable construction
  • No play in the moving parts
  • If you have a tilting table, this vise is useless

Expert Tips

This is a well-made vise that is suitable for home projects. It is reasonably sturdy and precise and its operations are quite smooth.

7) Goplus GP-101040148

This is a strong vise, made from heavy-duty cast steel. It has machined cold-rolled steel screws and a chrome handle that supports accurate drilling and exact centering. The adjustable shims are supposed to make fine adjustments possible, allowing for more precise positioning as you move your workpiece horizontally and vertically.

You get multiple mounting lugs that will simplify the process of attaching the vise to any drill press table. The stability of the product is guaranteed by the bolt down slots.

Goplus GP-101040148

Key Features:

  • Removable handles
  • Heavy-duty cast steel construction
  • Machine cold rolled steel screws
  • Chrome handle

It requires quite a bit of fine-tuning before you can use it. That includes smoothing the sliding surfaces with metal sandpaper and adjusting the screws holding the shims.

  • Cast steel body is durable
  • Can attach to any drill table with ease
  • Sufficiently precise
  • Requires extensive fine-tuning on arrival

Expert Tips

This vise has its limitations. It is compatible with small projects. It isn’t meant for milling but it has a fair amount of accuracy and operations that are smooth enough to contend with any moderate tasks you might have in mind.

8) WEN 423DPV

This vise can grip everything from metal to wood, plastic, and more. The construction is cast iron which speaks to the strength and durability of the product. You can trust it to inject an element of stability into your operations.

It includes 3-inch jaws and four onboard mounting slots. They will secure the product to any drill press table you have. The vise has a universal design that makes it compatible with most presses.


Key Features:

  • 4.1 pounds
  • Jaws open up to 3-1/10 inches
  • 1-inch throat depth
  • Cast iron construction

At 4.1 pounds, it is not only lightweight but surprisingly cheap. The low-price tag tells you why the product is so simple and straightforward. It lacks many of the components you require to attach it to a drill press such as bolts and wingnuts.

  • Compatible with most drill presses
  • Cast iron construction is durable
  • Lightweight and affordable
  • Doesn’t come with bolts, nuts or washers

Expert Tips

This product will appeal to people that want simple, lightweight vises that can perform the most basic functions. It is so cheap that you won’t lose much if the vise fails to satisfy your needs.

9) HSF 5-Inch Cross Slide Vise

This is the vise to buy if you are determined to make a milling machine out of your drill press. Compatible with wood and metal works and known for its incredible precision, the vise can attach to other tools such as a lathe to bring additional stability to your work.

HSF 5-Inch Cross Slide Vise

Key Features:

  • Jaws are 5 inches wide
  • Made from ductile iron 80000 PSI
  • Vertical and Horizontal Cross Travel
  • Adjustable gibs
  • Bolt down slots

The construction is ductile iron which tells you that the vise is quite durable. Expect hinged crank handles that drop out of the way, a pair of swivel handles for making front to back and left to right adjustments to the vise, not to mention the powerful serrated steel jaws.

  • Ductile iron construction permits minimum bending
  • High precision
  • Suitable for both wood and metalworking
  • Handles permit precise adjustments
  • Wiggles

Expert Tips

This is a decent vice that you can use for woodworking and metalworking. It will appeal to people that want to use their drill press for milling purposes.


Q. What is a Drill Press Vise?
This is a tool that holds your workpiece in place while you operate on it using the press.

Q. How Does a Vise Work?

ANSWER: You install the vise on the worktable; the workpiece (metal, wood, plastic, etc.) is placed between its jaws. The jaws clamp down on the workpiece, holding it in place.

Q. How to use a drill press vise?


To use a drill press vise, you must first attach it. First, figure out where you want it to go. Once you finally position it on the surface, you must ensure that the mounting holes line up with the drilled holes on the table. Use six or so bolts to secure the vise.

Once it is in place, you can start using it. Start by marking the place you want to drill on your workpiece. By turning the handle, you can open the jaws of the vise. Place the workpiece between the jaws.

Turn the handle to tighten the jaws, securing the workpiece. Align the drill bit with the mark you made on the workpiece. Activate the drill press and start drilling.

Q. What is a Cross Slide Drill Press Vise?

ANSWER: This is a vise with two mounts. Not only is it adjustable but it has jaws that can be placed in different positions.

Q. What is the Most Important Consideration When Attaching a Vise?

ANSWER: The most important factor is location. You need to find the perfect place to install the vise so that you can operate on your workpiece smoothly and optimally, without challenges or distractions.

Final Verdict

The best drill press vise is the one that performs optimally when it is paired with the tasks you want to perform. The list above is filled with all kinds of vises. The Irwin 226340 is lightweight and portable with textured jaws.

The WEN 414CV is made from industrial-strength powder-coated cast iron. The Performance Tool W3939 comes in a litany of sizes and configurations. It also features etched jaws, a pivot handle, and slot design mounting holes.

Every single one of the products above has something of significance to offer. Your job is to slowly study the attributes of each item until you find the one that matches your need.


Leave a Comment